THESE STEEL STRIPS ARE POPULARLY KNOWN AS HARDENED AND TEMPERED SPRING STEEL STRIPS, SPRING STEEL STRIPS, HARDENED STEEL STRIPS, BLUE TEMPERED STRIPS, SPRING STRIPS.
These are high carbon steel strips with Martensite grain structure and high tensile strength. It is
produced by passing the strip through a heating furnace and quenching in salt baths. Parts made from this
strip have uniformity in hardness, flatness and shape as compared to those made from annealed strips which
are then hardened and tempered in batches.
These strips are stocked with us in C80 grade as per the standard sizes listed below. We also have certain
sizes in c98 grade. It can also be supplied against a back order in C75, 74Ni8 and 75Cr1. These strips are
supplied against various options as per customers requirement. It can be slit edges, rounded edges.
Surfaces can be bright polished, unpolished, grey, blue polished, bronze polished
Properties of Hardened & Tempered C80 Chemical composition by weight | |
---|---|
CARBON | 0.75 - 0.85% |
MANGANESE | 0.6 - 0.90% |
SILICON | 0.0 - 0.35% |
SULPHUR | 0.35% MAX |
PHOSPHOROUS | 0.35% MAX |
Hardened & Tempered strips can also be made to meet your specific requirements in relation to edge type,
width tolerance, and surface finish.
. |
---|
Usually in coils, thicker strips can also be supplied in cut to length and levelled strips |
Edges are slitted |
Coil ID 300-500mm as per mutual agreement with buyer |
Coil weight as per mutual understanding with buyer |
Surface finish is bright suitable for electroplating |
This table is for reference only. Actual sizes keep changing from time to time according to market trends.
In case you don't see what you want, please get in touch with us
GRADE | THICKNESS | WIDTH | LENGTH | HARDNESS | SURFACE | FINISH |
---|---|---|---|---|---|---|
C80 | 3.0MM | 300MM | 2050MM | 44-47 | HRC | Bright |
C80 | 2.50MM | 300MM | 3050 | 44-47 | HRC | Bright |
C80 | 2.0MM | 200MM | Coils | 44-47 | HRC | Bright |
C80 | 2.0MM | 154.2MM | Coils | 44-47 | HRC | Bright |
C80 | 1.80MM | 154.2MM | Coils | 44-47 | HRC | Bright |
C80 | 1.60MM | 154.2MM | Coils | 44-47 | HRC | Bright |
C80 | 1.50MM | 154.2MM | Coils | 44-47 | HRC | Bright |
C80 | 1.40MM | 154.2MM | Coils | 44-47 | HRC | Bright |
C80 | 1.40MM | 127MM | Coils | 44-47 | HRC | Bright |
C80 | 1.20MM | 154.2MM | Coils | 44-47 | HRC | Bright |
C80 | 1.20MM | 127MM | Coils | 44-47 | HRC | Bright |
C80 | 1.20MM | 100MM | Coils | 44-47 | HRC | Bright |
C80 | 1.0MM | 200MM | Coils | 44-47 | HRC | Bright |
C80 | 1.0MM | 150MM | Coils | 44-47 | HRC | Bright |
C80 | 0.90MM | 200MM | Coils | 44-47 | HRC | Bright |
C80 | 0.80MM | 200MM | Coils | 44-47 | HRC | Bright |
C80 | 0.80MM | 152.4MM | Coils | 44-47 | HRC | Bright |
C80 | 0.70MM | 150MM | Coils | 44-47 | HRC | Bright |
C80 | 0.60MM | 165MM | Coils | 44-47 | HRC | Bright |
C80 | 0.50MM | 200MM | Coils | 44-47 | HRC | Bright |
C80 | 0.50MM | 150MM | Coils | 49-51 | HRC | Bright |
C80 | 0.50MM | 150MM | Coils | 49-51 | HRC | Blue |
C80 | 0.40MM | 150MM | Coils | 49-51 | HRC | Bright |
C80 | 0.40MM | 150MM | Coils | 49-51 | HRC | Blue |
C80 | 0.30MM | 150MM | Coils | 49-51 | HRC | Bright |
C80 | 0.30MM | 150MM | Coils | 49-51 | HRC | Blue |
C80 | 0.25MM | 150MM | Coils | 49-51 | HRC | Bright |
C80 | 0.25MM | 150MM | Coils | 49-51 | HRC | Blue |
C80 | 0.20MM | 150MM | Coils | 49-51 | HRC | Bright |
C80 | 0.20MM | 150MM | Coils | 49-51 | HRC | Blue |
. | . |
---|---|
BANDSAW BLADES | CLUTCH PLATES |
HORN DIAPHRAGM | CUTTING BLADES |
AGRICULTURAL IMPLEMENTS | BELLEVILLE WASHERS |
WAVE WASHERS | TEXTILE DROP PINS |
COIL SPRINGS | POWER SPRINGS |
ROLLING SHUTTER SPRINGS | FLAT SPRINGS |
WEAR PLATES | CONCRETE TROWEL PLATE |