Strip Steel, Carbon Steel Strip, Spring Sheet, Spring Steel Coil.

Acid Brittleness/Hydrogen embrittlement
Brittleness resulting from pickling steel in acid, hydrogen formed by interaction of iron and acid is absorbed and causes brittleness.

Aluminum Killed Steel
A steel where aluminum is used as a deoxidizing agent

Annealing
A slow heating and cooling process. Heating to and holding at a suitable temperature and then cooling at a suitable slow rate.

Austempering
Carbon steel is quenched above transformation ranges, in a medium having rate of high abstraction sufficiently high to prevent the transformation of high temperature formation products and then holding the alloy, until transformation is complete, at a temperature below that of pearlite formations and above that of martensite formation.

Bainite
A slender needle like acicular structure appearing in Spring Steel Strips characterized by toughness and greater ductility then tempered martensite.

Bend test
A test to determine ductility of flat rolled steel strip in which the strip is bent around its axis.

Bonderizing
A coating with a film composed of zinco phosphate in order to develop better surface for coating.

Camber
Edgewise curvature, a lateral deviation of an edge from a straight line. Lateral departure of the edge of the material from straight line forming a chord.

Carbide
A compound of carbon with one or more metallic elements.

Cold rolling
Rolling metal at a temperature below the softening point of metal to create strain hardening. Cold rolling changes the mechanical properties of strip and produces combination of hardness ductility stiffness etc. known as temper.

Decarburisation
Removal of carbon from outer surface of steel.

Dish
A concave shape of strip, across the width.

Elongation
Increase in length which occurs before fracture of Steel.

Endurance limit
Maximum alternating stress, which a given components/steel causing will withstand for indefinite number of times without fatigue failure.

Grain
An individual crystal in a polycrystalline metal or alloy.

Grain size
A measure of the areas or volumes of grains in a poly crystalline material, usually expressed as an average when the individual sizes are fairly uniform. Grain sizes are reported in terms of number of grains per unit area or volume, in terms of average diameter or as a grain size number derived from area measurement.

Grain boundary
The regions of a metal between individual grains. Atoms in these boundaries adopt positions of equilibrium between the lattices on either side, and are therefore in a state of local desender, depending upon the angle between the lattice axis on either side.

Grain growth
An increase in metals crystal size as annealing temperature is raised. Growth occurs by invasion of crystal arears by other crystals.

Hardenability
The ability of steel to harden in depth. It is the property that determines the depth and distribution of hardness induced by quenching.

Hardness
Degree to which a metal will resist cutting, abrasion, penetration, bending & stretching.

Inclusion
Particulars of impurities such as oxides, sulphites, silicates, etc

Laminations
A defect appearing in steel strip segregation or layer caused by packets of gas in ingots.

Martensite
A distinctive needle like structure existing in steel as on transition range in transformation of austenite. It is the hardest constituent of steel. A meta stable phase of steel formed by a transformation of austenite below Ms temperature. It is an interstitial super saturated of carbon in iron having body center tetragonal lattice. Its structure is characterized by a acicular ar needle like distinct pattern.

Mechanical spring
Spring produced by cold forming with or without subsequent heat treatment.

Microstructure
The structure of strip specimen as revealed in microscope.

Oil hardening
A process of hardening by heating within or above the transformation range and quenching in oil.

Pearlite
Lamellar structure resembling mother of pearl. A compound of iron and carbon occurring in steel as a result of transformation of austenite into aggregations of ferrite and iron carbide.

Permanent set
Deformation of strip under stress after passing the elastic limits.

Quenching
In the heat treatment of steel, the step of cooling metals rapidly in order to obtain desired properties’

Rockwell hardness text
A method of measuring hardness. The hardness is expressed as a number related to the depth of the residual penetration. A test for determining the hardness of a material based on the depth of penetration of a specified penetrator in to the specimen under certain arbitrarily fixed condition of test. A hardness test where the loss in kinetic energy of a falling diamond tipped metal 'tup', absorbed by indentation upon impact of the tup on the metal being tested is indicated by the height of rebo.

Scleroscope hardness text
A method of measuring hardness in which a diamond pointed hammer drops from a smooth tube and the rebound distance is measured.

Self hardening steel
A steel with sufficient carbon or alloying element to form martensite through air hardening.

Shims
A shiny thin hardened & tempered steel strip for tool, die & machines alignment.

Spherodizing
Process of prolonged heating and slow cooling which will convert carbides in spheroidal or globular shape in steel.

Spring back
An indicator of elastic stress. Measured as increase in diameter of a curved strip after removing it from mandrel where it was held.

Stress relieving
Reducing stresses by heating to a suitable temperature, holding long enough to reduce residual stresses and then cooling slowly enough to minimize the development of new residual stresses.

Tempering
A process of reheating quench hardened or normalized material to a temperature below transformation range and then cooling at any rate desired.

Temper brittleness
Brittleness that results when certain steels are held within or are cooled slowly through a certain range of temperature below the transformation range. The brittleness is revealed by notched bar impact tests at or below room temperature.

Yield Point
The load per unit of original cross section which, in soft steel a marked increase in deformation occurs without increase in load.

Yield strength
The stress load at which steel takes permanent set. The stress at which a material exhibits a specified deviation from proportionality of stress and strain. An offset of 0.2% is used for many steels.

Strip Steel, Carbom Steel Strip, Spring Sheet and Spring Steel Coil:

Steel Corporation is a leading manufacturer and supplier of Strip Steel, Carbon Steel Strip, Spring Sheet and Spring Steel Coil. Our products are subject to high quality standards.

We understand our customer's needs and manufacturing processes and to furnish products that not only satisfies their requirements but exceed their expectations.

Spring Steel is a term typically used for high carbon steel to make parts that will be heat treated. Our Strip Steel is narrow flat rolled steel produced to custom and/or precision characteristics.